Riello-ups NetMan 204 Bedienungsanleitung Seite 1

Modbus TCP/IP The UPS status can be monitored by means of the standard network protocol MODBUS TCP/IP. Modbus TCP/IP is simply the Modbus RTU protoco

UPS VALUES AND EVENTS HISTORY LOG ARCHIVE NetMan 204 records the UPS values (Datalog) and events (Eventlog) in a history log archive. The data are sa

ENVIRONMENTAL SENSORS (OPTIONAL) It is possibile to connect to NetMan 204 the environmental sensors for monitoring temperature, humidity and digita

CONFIGURATION OVERVIEW NetMan 204 can be configured via USB, via SSH or via HTTPS. NetMan 204 comes provided as factory default with DHCP enabled

Configuration via USB To configure NetMan 204 via USB it is necessary to: • Connect, with the USB cable provided, the micro-USB port with the USB po

CONFIGURATION MENU DESCRIPTION In order to make a new configuration effective, it is necessary to save it in the flash memory; this action automatic

Setup The main configuration menu displays a screen like the following: /------------------------/ / Setup / /------------

Here is a graphical representation of the setup menu and submenus: - 17 -

IP config /------------------------/ / IP config / /------------------------/ Hostname...:ups-server IP address/

Time setting /------------------------/ / Time setting / /------------------------/ Set time...:<-- Set timezone

INTRODUCTION Thank you for choosing our product. The accessories described in this manual are of the highest quality, carefully designed and built

Scheduled NTP /------------------------/ / Scheduled NTP / /------------------------/ NTP server...:time_server Sync on

Services 1 /------------------------/ / Services 1 / /------------------------/ SNMPV1 config..:<-- SNMPV1 communi

SNMPv1 config /------------------------/ / SNMPV1 config / /------------------------/ Trap receiver 1:powernetguard Trap

Email config /------------------------/ / Email config / /------------------------/ Email address 1:[email protected]

Email logic /------------------------/ / Email logic / /------------------------/ Email 1 Email 2 Ema

Miscellaneous /------------------------/ / Miscellaneous / /------------------------/ Log frequency..:5 sec UDP Po

Activation 1 /------------------------/ / Activation 1 / /------------------------/ Enable SSH...:[ON/off]<-- En

Wake-On-LAN address /------------------------/ / Wake-on-LAN address / /------------------------/ MAC Address 1..:00-12-3F-2B-F6-6F

Activation 2 /------------------------/ / Activation 2 / /------------------------/ Enable Serial N:[ON/off]<-- Enab

Example: how to connect a Temperature sensor, a Humidity & Temperature sensor and a Digital I/O & Temperature sensor in exactly this order.

ENVIRONMENTAL PROTECTION Our company devotes abundant resources to analyzing environmental aspects in the development of its products. All our produ

I/O Sensors /------------------------/ / Output / /------------------------/ Output UPS Lock...

Security /------------------------/ / Security / /------------------------/ UDP Password...:<-- UDP Firewall...

Pressing the ENTER key corresponding to the “Firewall” command displays a screen like the one shown below. /------------------------/ /

Save and load /------------------------/ / Save and load / /------------------------/ Save changes...:<-- Revert chan

Wi-Fi setup (optional card required) For Wi-Fi connection, an optional card is required. The Wi-Fi card is not provided with NetMan 204 but it ha

Expert mode Expert mode enables the configuration of advanced parameters that should be set by skilled technicians. These commands are supported:

FIRMWARE UPGRADE The NetMan 204 firmware can be updated via HTTP or via FTP. FIRMWARE UPGRADE VIA HTTP Connect via HTTP to the NetMan 204 to be upg

SNMPV3 CONFIGURATION For enabling SNMPv3, is necessary to set this value on the Expert mode: set snmpv3_enable true For configuring SNMPv3 access,

<securityType> is the minimum security level that must be used to gain access to this access right. Possible values are: • noauthnopriv (no au

MODBUS TCP/IP PROTOCOL This service is always active on the TCP port 502. The supported function are listed below, together with the accessible regi

CONTENTS DESCRIPTION ____________________________________________________ 6 OVERVIEW ____________________________________________________________

REGISTER(1) UPS - MEASUREMENTS UNIT NUMBER ADDRESS 9÷11 8÷10 12 11 Input mains star voltage V1 V 13 12 Input mains star voltage V2 V 14 13 Input

REGISTER(1) UPS – NOMINAL DATA UNIT NUMBER ADDRESS 73÷77 72÷76 78 77 Output nominal voltage (star) V 79 78 Output nominal frequency 0.1*Hz 80 79

REGISTER(1) SPECIAL FLAGS (SENTR UPS) (2) UNIT NUMBER ADDRESS 121 120 Byte 1 of “s = xx..” code / Byte 2 of “s = ..xx” code Flag 122 121 Byte 1 of

BACNET/IP CONFIGURATION For BACnet/IP configuration, you have to set the following variables using "Expert mode": set bacnet_enable <

OBJECT DESCRIPTION UNIT Analogue Input 0 Input voltage line 1 V Analogue Input 1 Input voltage line 2 V Analogue Input 2 Input voltage line 3 V An

MODEM CONFIGURATION NetMan 204 can be used to monitor the status of the UPS by means of a modem connected to the SERIAL port. The modem parameters

Events Meaning UPS Lock UPS is locked Ovrload/Ovrtemp UPS in overload or in overtemperature UPS Failure Failure of the UPS On bypass Operation f

TECHNICAL DATA NETWORK CABLE To connect the device to the Ethernet (10Base-T) or Fast Ethernet (100Base-T) network, a UTP (Unshielded Twisted Pair)

0MNACCSA4ENUB

IP config ________________________________________________________________ 18 Time setting _________________________________________________________

DESCRIPTION OVERVIEW NetMan 204 is a device that allows UPS management through a LAN (Local Area Network); the accessory supports all the main netw

FRONT PANEL A: Network port B: Led C: Reset button D: Micro-USB port E: Serial port Network port NetMan 204 connects to 10/100 Mbps Eth

Reset button The reset button allows to restart the NetMan204 or to load a default configuration with a predefined static IP address. To reset Net

NETWORK SERVICES NetMan 204 implements a series of services based on the main network protocols. These services can be activated or deactivated accor